Products & Performance
Our equipment crushed and transported 6.44 million square meters (equivalent to the size of five Tokyo Domes) of earth and sand generated during the cutting work at the hill relocation site in the Imaizumi area of Rikuzentakata city, Iwate prefecture. The Imaizumi area was built up to 45 meters above sea level (TP), and our high-capacity transport belt conveyors were used to raise the tsunami-affected city by about 12 meters.
Rikuzentakata city, Iwate prefecture
| Item | Flat Belt Conveyor |
|---|---|
| Conveyed materials | Rocks, earth and sand |
| Bulk specific gravity (t/m3) | 1.6 |
| Maximum transport volume (t/h) | 6,000 |
| Speed (m/min) | 250 |
| Belt width (mm) | 1,800 |
| Horizontal machine length (m) | Total machine length = 2,456.5 m (Maximum single machine length = 817 m) |
| Lift (m) | Maximum lift = 12.5 m |
| Electric motor (Kw, P) | Maximum power per unit = 2 x 400 kw = 800 kW, 6 P |
| Item | Flat Belt Conveyor |
|---|---|
| Conveyed materials | Rocks, earth and sand |
| Bulk specific gravity (t/m3) | 1.6 |
| Maximum transport volume (t/h) | 1,000 |
| Speed (m/min) | 80 |
| Belt width (mm) | 1,800 |
| Horizontal machine length (m) | 23.6ｍ×8基 |
| Lift (m) | 0.0 |
| Electric motor (Kw, P) | 30KW,6P |
| Item | Flat Belt Conveyor |
|---|---|
| Conveyed materials | Rocks, earth and sand |
| Bulk specific gravity (t/m3) | 1.6 |
| Maximum transport volume (t/h) | 6,000 |
| Speed (m/min) | 250 |
| Belt width (mm) | 1,800 |
| Horizontal machine length (m) | 68.5 |
| Lift (m) | 0.00 |
| Electric motor (Kw, P) | 132KW,6P |
An environmentally friendly suspension bridge that does not require the installation of intermediate piers in the river.
The rock is crushed by a crusher to a size that can be used as embankment material, and then put onto a belt conveyor.
Processing capacity: 1000 t/h (per unit), raw ore size: 950 mm, product size: 300 mm
This belt conveyor with a tripper (No. 3BC) is part of the wood fuel transfer and discharge facility in the wood fuel yard for the wood biomass power plant in Tsuruga city.
The tripper has a left-right diverting chute, and a stainless steel telescopic chute (with a 10 m telescopic stroke) is attached to the chute.
Near 171-9 Shizumi, Tsuruga city, Fukui prefecture (in Tsuruga Port)
| Item | Tripper belt conveyor (No. 3BC) |
|---|---|
| Conveyed materials | Biomass fuel wood chips |
| Bulk specific gravity (t/m3) | 0.25 |
| Maximum transport volume (t/h) | 800 |
| Speed (m/min) | 210 |
| Belt width (mm) | 1,600 |
| Horizontal machine length (m) | 231 |
| Lift (m) | 22.9 (tripper head pulley) |
| Electric motor (Kw, P) | 132 × 6 P |
